|
|
|
|
|
|
3*2M 420MPA glass art water jet cutting machine Chinese manufacturer with CE
|
Model No.︰ | WMT3020-AL |
Brand Name︰ | WAMIT |
Country of Origin︰ | China |
Unit Price︰ | US $ 36900 / pc |
Minimum Order︰ | 1 pc |
|
|
|
|
|
WAMIT 420Mpa 3 axis glass CNC water jet cutting machine
https://www.alibaba.com/product-detail/30m-min-Save-60-electricity-cost_62100067477.html?spm=a2747.manage.0.0.35b371d2VEv7ZS
our direct drive pump can save your 60%-70% electricity cost and improve 20% cutting speed!
ADVANTAGES:
1. we promise 2 years( 2000 hours) warranty always. and have got CE certificate
2. we use flow type cutting head, the cutting efficiency is at least 10% higher.
3. the abrasive sand hopper beside the cutting head is also flow design.
4. we have new technology that can make the machine moving speed is to 20-30m/min. normal speed is 6m/min as you see. if this
technology used in pure water cutting, the cutting cost will reduce 50%. if using other materials cutting like glass , marble,
steel, the cutting cost will also 20-30% reduced. but of course , the machine with this function price will be a little higher.
5. we use soft cover of the linear guider, can prevent dust away from the linear guider, so keep the linear guider keep precision
longer.
6. we assemble an auto oil feeding to linear guider, so customer needn't maintenance the linear guider always.
7. seperated body.
8. we will send a remote control pendent.
9. we have the world most convenient abrasive sand removing system. it can be used for any brand water jet cutting machine, maybe
you can promote this system in your country and other countries. please check the attachment.
11. we supply 420mpa pump with 37KW motor, but the price of the whole machine is very competitive now
12. we use variable pump, so can reduce electricity cost for customers.
13. we can do 220V and 415v also.
14. like height tracking system, positioning system , we can also provide.
15. all our components are SCHNEIDER brand
16. the motor and PLC are SIEMENS brand.
17. we can provide 5 axis with 10 degree and 3D 5 axis with 60 degree and robot waterjet
18. use 10mm steel for water tank supporter and use 8mm steel for beam, keep the machine working more stable.
19. use JAPAN YASKAWA servo motor.
20. imported TAIWAN TBI ball screw and linear guider
21. imported America intensifier and TAIWAN accumulator and high pressure assembly and low pressure assembly. if you have special
requests, we can also do.
22. we can provide 87Kpsi intensifier pump and direct drive pump.
Can nearly cut all material:
Alloy Steel
Aluminum
Armor Plate
Brass
Boron
Bronze
Cast Iron
Cobalt
Copper
Exotic Alloys
Hastalloy
Hardened Steel
Hot Rolled Steel
Inconel
Kevlar
Magnesium
Mild Steel
Nickel AlloysStainless Steel
Steel Alloy
Steel Hardened
Steel Hard Rolled
Steel Mild
Steel Tool
Tantalum
Tin
Titanium
Tungsten
Wrought Iron
Zinc
Acrylics
Ceramics
Composites
Foam
Fiberglass
Kevlar
Mylar Laminates
Nylon
Plastics
Plexiglass
Porcelain
PVC
Rubber
Thermoplastics
Teflon
Urethane
Vinyl
Armor Plate
Bullet Proof Glass
Glass,Mirror Glass
Ceramic Tile
Granite
Limestone
Marble
Porcelain
Terrazzo
Hardwood
Main technical parameter of water jet cutting machine
|
Intensifier Pump
|
Item
|
Parameter
|
|
Model
|
CAWJ3742Z
|
|
motor
|
SIEMENS
|
|
Method of Direction Regulation
|
Electronic Direction Regulation
|
|
Pressure Range
|
50-420MPA, continuous pressure is 330-380Mpa
|
|
Maximum Flow of Hydraulic Pump
|
90 L/min
|
|
Maximum Discharge Capacity
|
3.7L/min
|
|
Maximum Diameter of Gem Nozzle
|
0.33mm
|
|
Power of Master Motor
|
37KW
|
|
Power Source
|
380V/50HZ, can do 220V/60HZ, 412V
|
Cutting Table
|
Item
|
Parameter
|
|
X axis characteristic
|
Adapting the one-off extrusion forming aluminum alloy, 2000MM LENGTH. the cutting table width is 2200mm
|
|
Y axis characteristic
|
Cast iron used as foundation base , 3000MM LENGTH.the cutting table length is 3200mm.
|
|
Z axis characteristic
|
Z axis double linear guide and four sliding block , 150MM, CAN DO 200MM
|
|
control accuracy
|
±0.01mm, cutting accuracy is
±0.1mm, reposition accuracy:
±0.02mm, max travelling speed:6000mm/min
|
|
Ball screw,linear guide
|
TBI, TAIWAN
|
|
Table structure
|
Separated body, can be delivered by one 20'FCL container
|
|
Driving way
|
Servo drive system
|
|
CNC system
|
Ncstudio ,Fagor
|
|
Servo motor
|
SIEMENS motor.
|
|
Cutting head
|
Casting structure and concrete structure
|
|
Sealing way
|
Whole piece sealing,cancelling dustproof cloth on X,Y,Z axis
|
|
Loading weight water tank
|
Wall thickness is 6mm,using fluorocarbon coating, Can antirust at least 5 years.
|
CNC Controller
|
Item
|
Parameter
|
|
Control Method
|
CNC
|
|
Display Size
|
19inch LCD
|
|
Model of Cutting Text
|
DXF
|
|
Model of Computer
|
Industrial Control Computer
|
|
Operating System
|
Windows 7
|
|
PLC
|
SIEMENS
|
|
Cutting software advantage
|
Auto save and transfer common parameter
|
|
Controller displace
|
Can be fit to suitable place at own will
|
Automitic Abrasive Feeder
|
Item
|
Parameter
|
|
Founction
|
Sand storage and sand delivery
|
|
Operating
|
No need electrocnic control,sample operation
|
|
Capacity
|
200 kg for 8 -10hours
|
|
Pressure
|
0.3-0.6Mpa compresses gas pressure
|
|
|
|
|
Color
|
White
|
Deionization System
|
Item
|
Parameter
|
|
Water pressure
|
0.15Mpa~0.6Mpa
|
|
Water temperature
|
5°C~50°C
|
|
Environment temperature
|
5°C~50°C
|
|
Relative humidity
|
≤95%(25°C)
|
|
Water turbidity
|
<20FTU
|
Wireless Handle
|
|
Parameter
|
|
Founction
|
Wireless controlling waterjet
|
|
Display
|
Real- time display condition of X,Y,Z axis
|
|
Settings
|
Zero point, on/off valve set, X,Y,Z axis moving
|
|
Technology
|
Advanced technology
|
We also have 2015 new model automatic abrasive removing system . no need installation, can be used for any brand water jet cutting machine!
CUTTING SAMPLE
DELIVERY AND PACKING:
After Service:
We can provide overseas installation and training service. 24 hours in 7 days a week respond. and respond time is no more than 12 hours.
provide two years warranty time for the whole machine. easy-wear parts replace cost is very low.
Contact information:
Water Jet Glass Cutting – How is it Done
It’s true that when it comes to glass, it is indeed a brittle material, but that doesn’t mean that it cannot be cut. In fact, by using an abrasive water jet glass can be cut quite easily and the results are generally amazing. Most of the times though, glass is going to be cut for artistic purposes.
Quality of glass
Since there are different types of glass, some of them can be cut easier than the rest. In general though, thicker glass is a lot less easier to cut compared to the thinner type. The temperature at which the glass was tempered is also an important factor that influences the difficulty of cutting the glass. If the temperature was high, then the glass becomes brittle and can shatter easily.
Water delivery and abrasive
During the piercing of the glass, the timing of the abrasive delivery is essential. The recommended pressure should be between ten to twenty thousand PSI and the abrasive should hit the glass almost at the same time as the water starts to flow. If it doesn’t, then it’ll cause the glass to crack.
The glass’ support
The glass should be properly supported on the bottom side by using something that’s both soft and can offer even support so the jet won’t frost the bottom surface. For this very purpose, waterjet brick is an excellent choice.
The part’s design
If you’re designing a part cut from glass, there are a few adjustments that can be made for minimizing of any possible cracking may have on the part. You should also know that there is a wide range of piercing methods that can be easily used with glass. With a great setup, you’ll realize that any of them can be very simple to use, but it’s true that some of them are a bit better than others. Therefore, if you’re having trouble getting a great pierce with glass, just consider a different piercing method.
If you’re planning on cutting something that has multiple pierce points, there is a much higher chance it’s going to crack at a minimum of one pierce. That is why before you begin, you should pre-pierce all the start holes and lastly, cut all the other features. In this case, even if something were to crack, you’ll be able to just throw it away and start again without wasting too much money and time.
Other things to consider: Temperature
You need to be on the lookout for sudden changes in temperature between cold air and the hot water tank since this can cause your glass to shatter. For instance, if you just pulled a freshly cut piece of glass out of hot water, you shouldn’t hose it with cold water at all. Instead, wait until it cools down a bit or just let it cool down naturally.
Abrasive
It’s a fact that a great quality abrasive is going to provide superior waterjet parts, yet most of the times it’s going to come in handy when working with finicky materials such as glass. You’ll find that greater mesh sizes can give some pretty smooth results with minimal microchipping on the edges.
At the end of the day, it’s very important how you approach glass cutting and that you always do it by the book. Sure, sometimes you may want to rush things in order to finish a project faster, but you will only do so at your own risk. So take your time to do what you have to do instead of getting your money and time wasted just so you can finish a project a few minutes earlier.
Main Features
1. Gantry type balanced design work table, solid and stable, higher strength
2. Work table of CNC motion mechanism and workpiece supporting adopts a split structure, which eliminates the influence of water gushing on cutting precision during cutting
3. X-axis,Y- axis use high quality LINDEN SWEDEN rack and pinion, TBI rail, which ensure the accuracy of bearing parts, stable conveying, hard-wearing quality. During cutting, it causes splashing sand and water. Fully enclosed lifting structure design in Z-axis prevents corrosion of lead screws and guides.
4. Lntegrated automatic lubrication system make the maintenance more automatic and easier.
5. All electric components are Schneider brand
6. Equipped with YASKAWA AC servo drive power and motor ( Japan brand), high accuracy, long service life.
Servo Direct Drive Pump
1. Selection of motors: 15kw, can save power consumption above 60%
2.Pressure conversion methods: can save energy about 35%
3.cutting speed: greatly improved by 20%-50% than intensifier pump, if need 2o minutes when cut by intensifier pump, only need 10-15 mins when cut by direct drive pump
4. lower working noise.
5. high stability working.
6. In China, only we use a high-response servo motor. The motor is fast and pneumatic only when high-pressure water is output, and it does not work in idle and standby states.
7. light weight, the total weight is within 600kg.
Detailed Images
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Beverage bottle, cosmetic bottle, medicine bottle, jar etc.
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.
Machine Parts
Name: Linear Guide
Brand: Taiwan HIWIN
1.High positioning accuracy
2.Less wear and can maintain accuracy for a long time
Name: Servo motor
Brand: Japan, YASKAWA
1.Fast running speed and high precision
2.Easy to tune
Name: Control System
Brand: NCStudio
1.Simple and reliable operation
2.Easy to learn
3. 21inch screen
4. can provide ECS software which is imported from Italy
5. can provide IGEMS software.
Abrasive sand feeder
• 170 liter 200KG capacity , consumption is 25KG/HOUR • High-precision sensors alert operators when they need to replenish sand •
Safety relief valve • Working pressure: 0.2-0.3MPa • Water separator
No need electronic control, simple operation, reliable, maintenance-free. Can supply the cutting sand quantity . Need less than
0.2Mpa compressed gas pressure. Provide sand storage for the water jet cutter and automatically transfer the sand to the sand
bucket. Can increase the automation of the equipment and reduce the labor intensity of the operator.
Company Profile
SHANDONG WAMI CNC TECHNOLOGY CO.LTD is the professional manufacturer of water jet cutting machine and spare parts for all Chinese
brand water jet cutting machine . our factory is located in JINAN city, SHANDONG province, China.
we have 420Mpa intensifier pump, 80000psi intensifier pump , 90000psi direct drive pump and 420mpa with dual intensifier pump, we also can
provide 3 axis , 5 axis with 10 degree and dynamic 5 axis with 60 degree cutting head water jet cutting machine, pure water
cutting and abrasive sand cutting. our machines are with excellent quality - efficient and accuracy, economical investment with
low initial cost and low maintenance cost to our customers. All the machinery delivered by us come with first class after-sale
service. all machines are with one-year warranty of main parts, whole-life after-service for the entire machine.
We can supply water jet cutting machine according to your requests,from the cutting table size to the special design . Especially
our new design of automatic abrasive sand removing system bring convenience for glass and marble factories. this system can fit
for any brand water jet cutting machine. you needn't stop the machine while it is working.
our new FLOW type cutting head can improve you 10% cutting efficiency, and our new technology can make the machine moving speed to
30-50m/min so that reduce you 15%-50% cutting cost according to the materials.
Until now We have expanded our market to North America, Australia, Southeast Asia, Central Asia and the Middle East. And establish
a good relationship with our customers in Russia, Argentina, America, Canada, UK, Chile, South Africa, Ecuador,Kuwait, Hungary ,
Saudi Arabia , Vietnam, Turkey,Mexico,Malaysia ,Australia and other countries and regions.
Cutting sample
Our Customers
Packing & Delivery
FAQ
1. Are you manufacturer or trading company?
We are manufacturer of water jet cutting machine in JINAN city, Shandong, China.
2. What kind of material does your water jet cutting machine can cut?
There are plenty materials our water jet cutting machine can cut, such as stone, ceramic, quartz, glass, foam, plastic, rubber, copper, brass, aluminum, mild steel, pre-hardened steel, titanium, inconel and cast alloy.
3. What's your CNC water jet cutting machine's max. cutting thickness?
Generally speaking, if cut steel the max thickness of our water jet cutting machine can be up to 240mm, but we suggest cut no more than 150mm for smooth cutting. Now our Z axis distance is 170mm, we can customize for customers. Regular thickness please refer to: Marble is 0-120mm; granite is 0-110mm; tiles are 0-40mm; glass and mosaic is 0-80mm; steel, stainless steel, copper is 0-60mm; aluminum is 0-80mm; plastic, acrylic, foam is 0-200mm.
4. How we supply after-service?
Some countries we have after-service department, we will provide local service, if have no local service, we will arrange engineer for overseas installation and training. The installation and training time is generally 7-10 days. And we also can provide installation videos.
5. What's your delivery time?
Generally speaking is 30 days. if have stock, 7-15 days.
|
|
|
|
Product Image
|
|
Related Products
|
|
|
|
|
|
|