https://www.alibaba.com/product-detail/1010-China-desktop-water-jet-cutting_62465057273.html?spm=a2747.manage.0.0.35b371d2VEv7ZS
desktop water jet cutting machine
The gantry-style balanced design structure is more stable and improves the accuracy of the machine. Ultra-high pressure cutter head, which can be cut with pure water and sand. It has 3-axis and 5-axis cutter heads for vertical and non-vertical cutting with a maximum cutting angle of 60 degrees. The X/Y axis adopts the labyrinth waterproof and sandproof double protection system. The X/Y axis adopts Taiwan's high-quality guide rail and Swedish ball screw. It is durable and the Z-axis fully enclosed structure is guaranteed to be free from water and sand. Heavy-duty machine tools, high-temperature forging, so that the machine will not be deformed during use. China's first generation of self-designed ultra-high pressure servo direct drive pumps are more energy efficient, environmentally friendly and light, and ultra high pressure booster pumps are easier to operate and maintain. The CNC control system uses the WEIHONG professional waterjet cutting CNC system. we also have ITALY imported software which support more than 20 languages.
More advantages
1. Automatic lubrication system from the Valley of Japan.
2. The internal components are selected from Schneider International brand, with first-class quality and reliable work.
3. Way of drive : Servo ( drives and motors are from Japan YASKAWA ).
4. High precision, Ensure cutting results.
5. Provide customizable services.
6. After-sales Service: Field maintenance and repair service, Online support, Field installation, commissioning and training, Video technical support, Free spare parts.
HP intensifier pump
HP hydraulic intensifier pump
Maximum pressure: 60000Psi.
Boost ratio: 20:1.
Working pressure: 46000 Psi -55000 Psi.
Maximum displacement: 3.7L/min.
Inlet pressure: 0.4MPa.
Main motor power: 37KW.
With Siemens motor and Siemens high quality PLC control
Intensifier parts and pipe system (high pressure cylinder, Ceramic plunger assy, high pressure seal, low pressure seal, high pressure pipeline, check valve, etc.) Single row water filtration system (5Micron, 1micron, series) Manual voltage regulation Over-pressure automatic shutdown and under-voltage automatic protection function. A10V071 automatic variable oil pump and Schneider electrical components with high performance.
Control system
Adopt industrial PC
Dedicated water jet cutting software with graphic simulation running function, graphic input automatic programming function. • Support for DXF files. • Support forward and reverse processing functions. • Uniform speed control function. • Two modes of segmentation and smooth machining. • Automatic processing with small arc speed. • Coordinate recovery function after power off. • Double lift speed parameter function. • With cycle processing. • Convenient pause to continue and start machining in any segment. • Free time delay setting. • Apply SIEMENS PLC instead of relay, buttons are Schneider.
Abrasive feeder
• 170 liter capacity • High-precision sensors alert operators when they need to replenish sand • Safety relief valve • Working pressure: 0.2-0.3MPa • Water separator
No need electronic control, simple operation, reliable, maintenance-free. Can supply the cutting sand quantity . Need less than 0.2Mpa compressed gas pressure. Provide sand storage for the water jet cutter and automatically transfer the sand to the sand bucket. Can increase the automation of the equipment and reduce the labor intensity of the operator.
Production Process
Heat treatment
620 degrees in the furnace for 5 hours, down to 300 degrees for 3 hours, then naturally cooled in the furnace.eliminate internal stress in the welded frame.no deformation occurs during frame use,guarantee better cutting precision.
Shot blasting and powder coating
Remove impurities such as surface oxide scale to improve appearance quality.it can improve the fatigue fracture resistance of materials, prevent fatigue failure, plastic deformation and brittle fracture, and improve fatigue life.
Test
Test the straightness and parallelism of linear guide rail with precision measuring instruments.
Guaranteed higher precision when the equipment is running after the linear guide rail is installed.
Calibration
Calibrating equipment precision with a laser interferometer.guaranteed more accurate cutting precision.
Auto desanding system
Solves the problem of sand removal in waterjet equipment. High efficiently removes sand automatically.
This product is a new type of sand removal equipment independently developed by Shandong Womai CNC Technology Co., Ltd. Simple operation, high sand removal efficiency and almost no maintenance. The birth of the WAMI Auto desanding system for water jet cutting machinery solved the problem of clearing waste sand for water jet users all over the world.
Note: This part is optional and requires extra cost.
Features of WAMI water jet cutting machinery auto desanding system:
A: Does not affect the normal cutting of water jet cutting machinery. The sand removing device can perform sand removing work while the water jet machine is working. The equipment has improved the traditional sand removal operation (the machine must be shut down, the water and sand of the tank are cleaned out and the water is filled again), which has gained valuable time for normal work. B: Simple operation, complete sand removal and fast sand removal. It takes only 5 steps to complete the sand removal work: 1. The equipment is in position → 2. the air source is switched → 3. The sand suction head is placed in the water tank → 4, open the air source switch to remove sand → 5, the sand chamber is full of shutdown and dump the waste sand. Sand removal rate of the equipment More than 90%. C: Large capacity. The device has a diameter of 630 (720) mm, a height of 2.1 M, and a sand removal of up to 460 (610) L. For example, a water tank of 2 m * 3 m can be used continuously after removing 3-4 cans at a time. D: Thick steel plate, perfect hydraulic system. The equipment tank is made of 8mm thick steel plate, and an advanced water sand separation system is integrated inside the tank. Base is 20mm thick steel plate for durability. The switch base uses a manual hydraulic system and is equipped with safety bolts to make the base switch and seal become simple, safe and convenient. E: Powerful and stable. The equipment uses an advanced pneumatic diaphragm pump to generate a constant flow of high-pressure water under the drive of high-pressure gas. Sand removal provides powerful power. F: energy saving. The entire sand removal process of the equipment does not lose water in the water tank and does not cause waste of water resources. G: Mobile flexibility. The device is equipped with a ear holder for forklift fork picking, which is convenient to move, and one sand removing device can be used for multiple water jets.
Our cutting sample
Cutting Speed
|
Cutting
speed
|
Materials
|
Thinkness
|
Cutting Speed of direct drive pump (mm/min)
|
Cutting Speed of 420MPa(mm/min)
|
|
Marble
|
25
|
1000
|
800
|
|
30
|
800
|
600
|
|
Microcrystal stone
|
16
|
1200
|
900
|
|
Ceramic tile
|
12
|
2000
|
1500
|
|
14
|
1400
|
900
|
|
Glass
|
5
|
2000
|
1600
|
|
8
|
1800
|
1400
|
|
10
|
1500
|
1100
|
|
12
|
1200
|
900
|
|
14
|
1000
|
700
|
|
Carbon Steel plate
|
10
|
330
|
270
|
|
12
|
280
|
220
|
|
14
|
240
|
180
|
|
16
|
200
|
140
|
|
20
|
170
|
110
|
|
22
|
140
|
85
|
|
Aluminum
|
12
|
800
|
600
|
|
30
|
200
|
160
|
Our Customer
Packaging & Shipping
FAQ
1. Are you manufacturer or trading company?
We are manufacturer of water jet cutting machine in JINAN city, Shandong, China.
2. What kind of material does your water jet cutting machine can cut?
There are plenty materials our water jet cutting machine can cut, such as stone, ceramic, quartz, glass, foam, plastic, rubber, copper, brass, aluminum, mild steel, pre-hardened steel, titanium, inconel and cast alloy.
3. What's your CNC water jet cutting machine's max. cutting thickness?
Generally speaking, if cut steel the max thickness of our water jet cutting machine can be up to 240mm, but we suggest cut no more than 150mm for smooth cutting. Now our Z axis distance is 170mm, we can customize for customers. Regular thickness please refer to: Marble is 0-120mm; granite is 0-110mm; tiles are 0-40mm; glass and mosaic is 0-80mm; steel, stainless steel, copper is 0-60mm; aluminum is 0-80mm; plastic, acrylic, foam is 0-200mm.
4. How we supply after-service?
Some countries we have after-service department, we will provide local service, if have no local service, we will arrange engineer for overseas installation and training. The installation and training time is generally 7-10 days. And we also can provide installation videos.
5. What's your delivery time?
Generally speaking is 30 days. if have stock, 7-15 days.
